Sunday, July 25, 2010

Flounces

I wanted to share how the flounces turned out using the fabric as lining.  It has given them some body which I think was necessary and makes them more like the ones on the dress that I am copying imitating. 













I stitched 1/4 inch from the outer edge of the lining fabric pieces and then trimmed the outer edge right up to the stitching line.  I attached the lining fabric together at the shoulders per the instructions.  I then sewed the outer edges of the two layers together.  After pressing the seam allowance I then turned under the lining fabric to match at the upper edge of the flounce.  This method allowed the upper fabric to turn under about 1/8 of an inch as I stitched the two outer edges together using 3/8 seam allowance.














I then basted the flounce to the upper bodice side front and back pieces which also had been stitched at the shoulder.

2 comments:

  1. Your flounces turned out beautifully! Can't wait to see the rest.

    ReplyDelete
  2. Ditto. Your dress is going to be beautiful.

    ReplyDelete

August Sewing Simplicity 7295

 I am not doing well as a blogger. I have been working on this project since July 30. Today, I finally finished it. It has been a stop-and-g...